Wire preperation consist of 2 main procedures :

1. Rolling
2. Drawing

Rolling process is necessary in the jewellery manufacturing process where ingots are rolled into round, halfround, square or hexagonal wires.

Drawing is the process where a wire (solid or hollow) is drawn into a smaller cross-sectional area using a drawing plate or drawing die.

OAM F. lli Cavallin - M175 TF

Rolling mill for wire working with closed rollers; suitable for chain makers and great production.

OAM F. lli Cavallin - Filly 200

Rolling mill, for Flat and wire

OAM F. lli Cavallin - M125/W

Wire flattening equipped with winder and translator unit. Suitable for production of flat strip generated from round or for production of peculiar profiles by fitting special rollers or with engravings.

OAM F. lli Cavallin - FILLY 200/130

Rolling mill for break-down and finishing.

VM/TR1V

This wire drawing bench has been projected to wire draw precious metal bars or tube with a maximum diameter of 14mm.

Wire Drawing Machine - 12 Passage

The pulling roller and the wire-collecting reel are moved by 2 seperated motors in order to use the reel and also to wind the wire from other process.

IECO - Z 50-307/310, Continuous Casting Machine

Induction melting furnace for continuous casting of all the alloys and colors of gold and silver. Fitted with a single or double inductor and one or work heads for the production of wire, flat bars, tubes and other sections on request. All our melting furnaces for the continuous casting feature a newly designed microprocessor that can control, setup, memories and print 99 melting programs.

IECO - Fast Wire Z54 Series

Continuous production of wire with diameters ranging from 3mm to 6mm and various sizes of gold and silver strips in all their alloys and colors, including all soldering alloys. All these machines are fitted with leading-edge microprocessors, which control, set, memorize and print 99 work programs.